TE OGŁOSZENIE JUŻ DAWNO ZĄBKOWAŁO
ALLEGRO TO NĘDZA...

DOKUMENTACJA PRODUCENTA : www.bumm.de/files/Produkte/Anleitung_IQ_Cyo_RZ.PDF

PRACA LAMPY W PRAKTYCE:
www.youtube.com/watch?v=pLl0LRvXQk8

Busch + Müller LUMOTEC CYO PREMIUM SENSO PLUS
EAN: 4006021009400
ZASILANIE : PRĄD P R Z E M I E N N Y
Z PRĄDNICY W PIAŚCIE (SHIMANO, SHUTTER PRECISION, SON ITP)

JASNOŚĆ : 80LUX (~45 metrów)
MODEL : 1752QSNDI-04
CECHY : CZUJNIK NATĘŻENIA ŚWIATŁA OTOCZENIA / ŚWIATŁO POSTOJOWE / WŁĄCZNIK

www.bumm.de/en/products/dynamo-scheinwerfer/produkt/1752qsndi.html?

Z INSTRUKCJI OBSŁUGI
*** Assembly
Make sure to securely fix the headlamp to the bicycle using the already attached
stainless steel bracket or another bracket and adjust it in a way to prevent any blinding effect on the oncoming traffic. Align the beam on the road at approximately 10 m
distance. Tighten the bolts so as to avoid unintended misalignment of the headlamp.

Caution: For the versions not including an integral reflector, road traffic regulations in
Germany require an additional front reflector on the bicycle.

*** standlight function (plus)
The standlight function is always ready for operation. It is completely maintenance
free and works without batteries or rechargeable batteries. The standlight function
can be turned off by switching to the „0“ position.
This is how it works: A minor amount of the energy generated by the dynamo is
stored in a condenser while riding. The condenser is already fully charged after riding for about 3 minutes. While standing, the energy stored is supplied to the LED in
the headlamp ensuring that the Cyo keeps on shining. The standlight function can be
turned off by switching to the „0“ position. The remaining capacity is stored in the
condenser for several days so that the headlamp can be used as a light source, e.g. in
a dark cellar, when set to the „S“ or „1“ position.

*** automatic startup function (senso)
Lights are automatically switched on with a hub dynamo in operation.
Switch in „S“ position The headlamp and rear light are automatically switched on
(automatic setting) in twilight and darkness. The light-dark sensor incorporates
a turn-off delay of approximately 8 seconds thereby providing
added safety because the headlights of traffic driving past,
for example, cannot interfere with the sensor and turn off
the light.
Switch in „0“ position The lighting system is inactive. The standlight function
in the headlamp is turned off.
Switch in „1“ position The headlamp shines permanently while riding, also
in daylight, e.g. in case of fog.
Additional information on LUMOTEC IQ Cyo

*** Enhanced safety: 8 sec. Automatic shutdown delay
The light/dark sensor (on “senso“/“senso plus“) switches off the headlamp with a
predetermined delay of 8 sec. so that a temporary brightness (e.g. car headlights
turned up) will not cause immediate switchoff.

The headlamp is intended for powering with dynamos (AC voltage) only. If you
require a special E-bike version of the headlight for DC voltages from 6 to 42 V,
please contact your specialized dealer. When powered by DC voltage, the polarity of
the connection has to be reversed: mass connected to +, current connected to —. If
the bicycle is transported or cleaned upside down, the headlamp has to be covered
with a plastic bag to prevent moisture from entering through its bottom apertures.
The overvoltage protection of the headlight is effective even if no rear light is connected.