Sprzedam używany dysk twardy Western Digital WD Elements 14TB. Dysk sprawny bez wielkich śladów używania (wciąż folia na obudowie).
Sprzedaję wraz z oryginalnym zasilaczem (razem z adapterem na zasilanie UK), kablem oraz w oryginalnym pudełku, używany w serwerze jako archiwum, więc głównie do odczytu.

Poniżej zapis ze SMART-a.

---

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar (He10/12)
Device Model: WDC WD140EDFZ-11A0VA0
Serial Number: 81GBB74V
LU WWN Device Id: 5 000cca 2a4c52a3d
Firmware Version: 81.00A81
User Capacity: 14,000,5********36 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Sep 14 22:52:32 2024 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1407) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0004 135 135 054 Old_age Offline - 108
3 Spin_Up_Time 0x0007 080 080 001 Pre-fail Always - 405 (Average 401)
4 Start_Stop_Count 0x0012 095 095 000 Old_age Always - 2164
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000a 093 093 001 Old_age Always - 5
8 Seek_Time_Performance 0x0004 133 133 020 Old_age Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 7133
10 Spin_Retry_Count 0x0012 100 100 001 Old_age Always - 0
12 Power_Cycle_Count 0x0032 089 089 000 Old_age Always - 769
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5032
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 5032
194 Temperature_Celsius 0x0002 039 039 000 Old_age Always - 40 (Min/Max 11/49)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 4801 -
# 2 Extended offline Completed without error 00% 4537 -
# 3 Extended offline Aborted by host 40% 4406 -
# 4 Short offline Completed without error 00% 4368 -
# 5 Short offline Completed without error 00% 3711 -
# 6 Extended offline Completed without error 00% 1052 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

The above only provides legacy SMART information - try 'smartctl -x' for more

---

Możliwy odbiór osobisty w Krakowie