Interface audio Saffire PRO 26 i karta DIGITUS Firewire 800. W zestawie interface, karta firewire, kabel fw400/800 (do połączenia interfejsu z kartą), zasilacz. Wszystko sprawne i w dobrym stanie.

Karta DIGITUS Firewire 800
Typ: PCIe
Rodzaj złącza: 9pin Firewire gniazdo x3
Szybkość transmisji danych: 800Mbps
chipset: XIO2213B (PnP i Hot Swap)
Działa bezproblemowo z interfacami audio.

Focusrite Saffire PRO 26 jest interfejsem audio z 16 wejściami i 8 wyjściami zaprojektowanym dla nowoczesnego studia domowego. Interfejs wyposażono w 4 preampy mikrofonowe Focusrite, dwa wejścia instrumentalne TRS, dwa niezależnie kontrolowane wyjścia słuchawkowe, 5-segmentowy wskaźnik LED do pomiaru sygnału wejściowego. Interfejs pracuje z częstotliwością próbkowania 24-bit/96kHz.
Saffire PRO 26 zapewni perfekcyjną integrację, elastyczne przekierowywanie sygnału, a także stabilne działanie sterowników.

Saffire PRO 26 Specifications
MIC
• Frequency Response: 20 Hz to 20 kHz +/- 0.1 dB (at min. gain)
• THD+N: -98 dB (rel -1 dBFS input, min. gain, 20 kHz bandwidth)
• Noise: EIN <-124 dBu (max. gain with 150 ohm termination, CCIR-RMS weighting)
LINE
• Frequency Response: 20 Hz to 20 kHz +/- 0.1 dB (at min. gain)
• THD+N: -88 dB (rel -1 dBFS input, min. gain, 20 kHz bandwidth)
• Noise: EIN <-83 dBu (Chs 1 & 2); EIN <-94 dBu (Chs 3-6) (max. gain, 50 ohm termination, CCIR-RMS weighted)
INSTRUMENT
• Frequency Response: 20 Hz to 20 kHz +/- 0.02 dB (at min. gain)
• THD+N: -92 dB (rel -1 dBFS input, min. gain, 20 kHz bandwidth)
• Noise: EIN <-97 dBu (max. gain with 600 ohm termination, CCIR-RMS weighting)
DIGITAL PERFORMANCE
• Clock Sources:
• Internal clock.
• Sync to word clock on S/PDIF (coaxial input)
• Sync to word clock on ADAT input
• Sync to word clock on optical S/PDIF input (when enabled)
• JetPLL™ PLL technology providing superb jitter reduction, for class-leading converter performance
• Sample rate clock accuracy: 4.5 ppm
• Sample rates: 44.1 to 96 kHz
• 18 input channels to computer: Analogue (6), S/PDIF (2), ADAT (8) and Mix Loop-back (2)
• 8 output channels from computer: Analogue (6) and S/PDIF (2)
• Fully assignable 18 input, 6 output mixer
WEIGHT and DIMS
• 3 kg
• 35 cm x 4.5 cm x 26.5 cm
ANALOGUE INPUTS
• Chs 1 & 2: Mic (rear XLR) or Line/Instrument (front TRS)
• Chs 3 & 4: Mic/Line inputs on rear Combo connectors, auto-switching between XLR and TRS
• Chs 5 & 6: Line inputs (rear TRS)
• Mic gain range: 50 dB
• Line 1-6 gain range: -50 dB
• Instrument gain range: 50 dB
• Input Pad on inputs 1 & 2: 8 dB
• Phantom power switched in 2 channel groups on Mic. 1-4
• Mic and instrument maximum input level: +8.5 dBu (+16.6 dBu (mic)/+12.8 dBu (inst) with pad on inputs 1 and 2)
• Line maximum input level: >+28 dBu
33
ANALOGUE OUTPUTS
• Line level 6 x ¼” TRS jacks (Outputs 1 to 6)
• Nominal output level: 0 dBFS = 16 dBu, balanced
• Frequency Response: 20 Hz to 20 kHz +/- 0.7dB
• THD+N: <0.0010% (-95 dB) (measured with -1 dBFS input, 20 kHz bandwidth)
• Hardware and Software controlled Digital Volume control for all outputs (assignable in software)
• Hardware and Software controlled Digital Dim and Mute controls for all outputs (assignable in software)
• All outputs are usable as monitor outputs
DIGITAL I/O
• S/PDIF input (Chs 7 & 8) and output (Outputs 7 & 8): RCA phono on rear panel, 24-bit, 44.1 - 96 kHz.
Output transformer isolated
• ADAT Input (Chs. 11 to 18): 8 channels (44.1/48 kHz), 4 channels S-MUX (88.2/96 kHz)
MIDI I/O
• Input and output (5-pin DIN) on rear panel
FIREWIRE
• 1 x S400 port
POWER
• 12 V DC. External AC adaptor supplied
HEADPHONE MONITORING
• 2 x ¼” TRS jacks on front panel
• Output level: 13.2 dBu into 150 ohms
FRONT PANEL INDICATORS
• Metering of analogue inputs (1-6); 5 segment, 3-colour bargraphs (-42, -18, -6, -3 and 0 dBFS).
• Lock status LED
• FireWire Active LED
• Monitor MUTE switch and LED
• Monitor DIM switch and LED
• 2 x 48 V switches and LEDs
• 2 x Instrument switches and LEDs
• 2 x Pad switches and LEDs
• Power switch and LED